Replace Laptop battery in NZ Friendly, Reliable Professional Distributor!

DC1000V & AC750V AC/DC 1000A Clamp Multi Meter Tester Brand NEW

MASTECH MS2101 3999 Counts AC/DC Current Clamp Meter

High-Performance, Brand NEW!

Introduction:

This meter is a portable professional measuring instrument with LCD display. The 'single-hand operation' design for the range switch makes measurement simple and easy. Overload protection and low battery indication are provided. It is an ideal multi-function Instrument For measuring DC/AC voltage, DC/AC current, Resistance, Capacitance, Temperature, Frequency, Duty Cycle, Diode and Continuity Test with battery operated. 

Perform measurements of AC/DC voltage and current, resistance, frequency, duty, capacitance, temperature, duty cycle, as well as continuity and diode test. 

Display: 3999 counts with analog bar LCD display 

Maximum voltage between terminals and earth ground: 1000V CAT II or 600V CAT III, pollution grade 2 

Over range protection for all ranges 

Reading hold function 

Maximum & minimum value measuring function 

Converte rate: 3 times/sec 

Auto power off 

Continuity test 

Diode test 

Temperature test 

MAX. diameter for clamp: ?42mm 

Secondary injection molding case 

Conform to the IEC1010-1 & IEC1010-1-032 standards 

Model	MS2101
Double Insulation	1000 CAT II, 600V CAT III and pollution degree 2
Safety Standard	IEC1010-1, IEC1010-2-032
Altitude	2000M
Display	3 3/4, 15mm digit height, 3999 counts,LCD
Test Range Method	Auto Range
Polarity Indication	"-" display for negative polarity
Frequency Accuracy	40Hz to 100kHz±0.1%
ADP measurement	600mV±3.0%
Test Rate	2~3 times/second
Operating Temperature	5℃ ~ 35℃
Storage Temperture	-10℃ ~ 50℃
MAX. diameter for Jaw	Ф42mm
Dimension	250mm x 99mm x 43mm
Battery	DC 9V IEC 6F JIS 006P NEDA 1604 (Not Included)
Weight	480g
Technical Parameters	Range		Resolution		Accuracy
DC Voltage	0.4V		0.1mV		±(0.7%+1)
	4V		1mV		±(0.7%+1)
	40V		10mV
	400V		0.1V
	1000V		1V		±(0.8%+3)
AC Voltage	4V		1mV		±(0.8%+5)
	40V		10mV
	400V		0.1V
	700V		1V		±(1.0%+10)
DC Current	400A		0.1A		±(3.0%+3)
	1000A		1A		±(3.0%+3)
AC Current	400A		0.1A		±(3.0%+3)
	1000A		1A		±(3.0%+3)
Resistance	400Ω		0.1Ω		±(1.2%+1)
	4KΩ		1Ω
	40KΩ		10Ω
	400KΩ		0.1Ω
	4MΩ		1KΩ
	40MΩ		10KΩ		±(2.0%+3)
Capacitance	4nF		1pF		±(4.0%+10)
	40nF

1 x Clamp Meter 

1 x Set of Test Leads 

1 x K-Type thermo probe 

1 x Carry Bag 

Orico w8ph4 usb3.0 hub high speed splitter hub hard drive hub splitter 4 ports

New 2.5 SATA HDD External Enclosure USB3.0 Interface Tool Free ORICO 2588US3

Orico USB 3.0 7 port Hub with USB 3.0 Cable and Power Adapter

3-bay 3.5 USB 3.0+eSATA interface HDD External enclosure ORICO 3539SUSJ3